HP TC2120 - Manual (Page 50)

44
Chapter 3 Installing and Configuring
hp 2120 Startup CD-ROM
The hp tc2120 Startup CD-ROM provides you with the latest NOS drivers, Diagnostics for Windows, BIOS
Flash Utility, and a utility for creating diskettes.
• Run the hp Startup CD-ROM on any Windows PC with an HTML browser to obtain the required NOS
drivers and the BIOS Flash Utility located on the CD-ROM.
• Refer to the hp server tc2120 NOS Installation Guide, when installing the NOS drivers on the server for
more information about using the hp Startup CD-ROM.
Refer to the topic “NOS Installation” on the next few pages, for more information.
Accessing the hp tc2120 Startup CD-ROM
To access the hp tc2120 Startup CD-ROM, use a Windows PC with an HTML browser tool such as Microsoft
Internet Explorer 4.x, or Netscape Navigator version 4.x or greater. The CD-ROM should auto-start, but if it
does not, start it by opening the Startup.htm file located at the root level of the Startup CD.
Contents of the hp tc2120 Startup CD-ROM
The hp tc2120 Startup CD-ROM contains the following drivers, utilities, and other resources:
• NOS Drivers (IDE, SCSI, SCSI Raid, IDE Raid, NIC, Tape Drive, Modem, Video) for all supported NOSs
on the hp server tc2120 (IDE and SCSI models).
• Diagnostics for Windows 2000
• BIOS Flash Utility
• Pentium 4 and Celeron patch for Netware 5.1 and 5.1 SBS
• hp server tc2120 Operations and Maintenance Guide
• hp server tc2120 Regulatory Guide
• Ultra3 SCSI HBA Installation and Configuration Guide
NOS Installation
The instructions for manually installing your specific network operating system (NOS) and the respective NOS
drivers are provided in the hp server tc2120 NOS Installation Guide. The hp server tc2120 NOS Installation
Guide will help you when creating and copying the appropriate drivers (NOS, IDE, SCSI, NIC, and Video) onto
the required diskettes. In some cases you will use the diskettes to load the appropriate drivers onto the server,
or load the drivers directly from the hp Startup CD-ROM onto the server. Refer to the Welcome menu on the
hp tc2120 Startup CD-ROM.
Diagnostics for Windows
The Diagnostics for Windows utility provides an easy-to-use hardware diagnostic for server verification, burn-
in, and rapid troubleshooting. The utility is installed from the hp tc2120 Startup CD-ROM, and run under
Microsoft Windows. For instructions on installation and use, refer to the README file within the Diagnostics
for Windows folder on the Startup CD-ROM.
NOTE HP recommends using Diagnostics for Windows to verify all
server functions are operating correctly, after completing all
the configuration steps. The Diagnostics for Windows utility
generates a text file containing the hardware detected and the
test results. This text file should be saved to a diskette for
future reference or use by your support provider.