beautypg.com

Sliding the system board into the chassis, Aligning the system board pci connector – HP AD117-9003A-ED3 User Manual

Page 84

background image

2.

Grasp the new system board by its edges and carefully align it in the server:
a.

Angle the board to allow the PCI connector to slide into the PCI cage bay area. See

Figure 4-53

.

Figure 4-53 Sliding the System Board into the Chassis

b.

Align the system board keyholes with their standoffs on the chassis.

c.

Slide the PCI connector posts on the system board into their slots on the server chassis.

NOTE:

You must remove the PCI cage from the chassis to install the system board.

See

“Removing and Replacing PCI Card Cage”“Removing the PCI Card Cage” (page 71)

.

3.

Slide the system board toward the rear of the server to secure the system board on its
standoffs. See

Figure 4-54

and

Figure 4-55

.

Figure 4-54 Aligning the System Board PCI Connector

84

Removing and Replacing Components