HP AD117-9003A-ED3 - Manual (Page 55)

4. Remove the main portion of the airflow guide:
a.
Hold the guide using the opening on top of the guide. See Figure 4-20 .
b. At the same time, grasp the back end of the airflow guide and lift the guide out of the
server.
Figure 4-20 Removing the Processor Airflow Guide
5. Disconnect the power cable connected to the guide from the system board.
6. Remove the front portion of the airflow guide by doing the following:
a.
Remove server fans 1A and 1B.
b. Rotate the clip clockwise to release the latch. See Figure 4-21 and Figure 4-22 .
Figure 4-21 Opening the Release Clip
Removing and Replacing Internal Components 55