HP AD117-9003A-ED3 - Manual (Page 44)

Figure 4-4 Removing and Replacing the Top Metal Cover
3. Lift the top metal cover off the server chassis.
Replacing the Top Metal Cover
CAUTION: Secure any wires or cables in your server so that they are not cut or interfere with
the replacement of the top metal cover.
1. Align the front edge of the top metal cover with the alignment mark on the optical drive
bay. See
Figure 4-5 .
Figure 4-5 Aligning the Top Metal Cover
2. Grasp the blue release lever and slide the top metal cover toward the front of the server until
the lever snaps into place. See
Figure 4-6 .
44 Removing and Replacing Components