Specifying scsi parameters, Using the scsi setup utility, C-23 – HP AD117-9003A-ED3 User Manual

Page 162: Sysmode, Command

Example C-23 sysmode Command

Shell> sysmode
System Mode: NORMAL

Shell> sysmode admin
You are now in admin mode.

Shell> sysmode service
You are now in service mode.

Shell> sysmode normal
You are now in normal mode.

Specifying SCSI Parameters

The following SCSI parameters can be configured for the SCSI board:
•

SCSI ID (SCSI initiator ID)

•

Maximum data transfer rate (SCSI rate)

•

Bus width

•

Whether the HBA is bootable (driver support)

•

Avoid bus resets (secondary cluster server)

Using the SCSI Setup Utility

To use the SCSI Setup Utility to specify SCSI parameters:

162

Utilities