HP AD117-9003A-ED3 - Manual (Page 34)

Figure 2-8 10/100/1000 base-T Ethernet Gb LAN B Connector LEDs
Table 2-8 10/100/1000 base-T Ethernet Gb LAN B Connector LEDs
Description Color Location
1000 MHz with Ethernet protocol and twisted-pair wiring is enabled Amber Speed (upper left)
100 MHz with Ethernet protocol and twisted-pair wiring is enabled Green
No link
10 MHz with Ethernet protocol and twisted-pair wiring is enabled
Off
LAN activity Flashing green Link (upper right)
No link Off
Management Processor LAN LEDs
The LAN port of the optional Integrated Lights Out (iLO) Management Processor (MP) uses an
RJ-45 type connector. This connector has four LEDs that signal status and activity. The iLO MP
is required for Proactive 24 or Critical Service support. See
Figure 2-9 and Table 2-9 for the location
and description of the MP LAN LEDs.
Figure 2-9 MP LAN LEDs
Table 2-9 iLO MP LAN LEDs
Description Color LED
iLO is running self-test or error detected Yellow Self-test
10 BT link established Green 10 BT
10 BT link activity Flashing green
Off: no link
100 BT link established Green 100 BT
100 BT link activity Flashing green 100 BT
Off: no link 100 BT
34 Controls, Ports, and LEDs