HP AD117-9003A-ED3 - Manual (Page 58)

Figure 4-23 DIMM Slot Identification
Removing DIMMs
To remove DIMMs:
1. Power off the server and disconnect all cables. See “Powering Off the Server” (page 37) .
2. Remove the top metal cover. See “Removing the Top Metal Cover” (page 43) .
3. Identify the DIMM to be removed and push the appropriate extraction levers found on
either side of the DIMM slot outward to the open position. The DIMM ejects from the slot.
4. Remove the DIMM from the socket. If the removed memory is functional, store it in a
static-free container for future use.
58 Removing and Replacing Components