HP OMNIBER 718 HP 37718A - Manual (Page 62)

52
Selecting Test Features
Using FEAC Codes
3 Choose the FEAC CODE TYPE.
4 Choose the MESSAGE from the choices displayed.
If you chose a DS1 message an additional field to the right of the DS1
MESSAGE is displayed. Position the cursor on this field and choose
or .
If you choose use the EDIT keys to select a channel
from 1 to 28. Press when finished.
5 If is chosen, choose the REPEAT (TIMES) LOOP and
MESS, in the range 1 to 15.
6 If is chosen, choose the BURST LENGTH (TIMES).
7 Choose TRANSMIT NEW CODE or to transmit the
selected FEAC message.
TIP: To View FEAC Messages
The received FEAC message can be viewed on the display.
ALL SINGLE CHANNEL
SINGLE CHANNEL
END EDIT
LOOPBACK
ALARM/ STATUS
BURST ON
RESULTS