HP OMNIBER 718 HP 37718A - Manual (Page 165)

155
Selecting and Using "Other" Features
Setting Time & Date
Setting Time & Date
Description When making Bit error measurements and recording results you can
have certain events timed chronologically, for example, Alarms; Error
Seconds.
The capability to set the Time and Date is provided on the
display.
HOW TO: 1 Choose CLOCK MODE and set the Time and Date using ;
; ; ; and .
2 Choose CLOCK MODE to complete the setting of Time and
Date.
OTHER
TIME & DATE
SETUP
INCREASE DIGIT DECREASE DIGIT
RUN