Adding errors & alarms at the sonet interface, Adding errors & alarms at the sonet interface 49 – HP OMNIBER 718 HP 37718A User Manual
Page 59
49
Selecting Test Features
Adding Errors & Alarms at the SONET Interface
Adding Errors & Alarms at the SONET
Interface
Description
Errors and alarms can be added to the SONET interface signal during
testing.
HOW TO:
1
Set up the SONET transmit interface and payload required. See
"Setting SONET Transmit Interface " page 4.
2
Choose the ERROR ADD TYPE and RATE required.
Errors can be added at preset rates and at USER programmable rate.
With the exception of ENTIRE FRAME and A1A2 FRAME, errors can
be added at ERROR ALL rate.
If CV-L errors are chosen errors can be added to trigger an APS
THRESHOLD. This takes the form of N errors in T time period. N and
T are both selectable.
3
Choose the ALARM TYPE
Errors and Alarms can be added at the same time.