HP OMNIBER 718 HP 37718A - Manual (Page 26)

16
Setting the Interfaces
Setting DSn Receive Interface
5 Choose the PAYLOAD TYPE.
If
is required must be chosen.
If is chosen, the DSn test signal must be set up. See
“Setting Transmit Structured Payload/Test Signal” page 37.
If you chose 2 Mb/s, DS1 or DS3 as the PDH/DSn SIGNAL rate, the
FRAMED choice is expanded to provide a menu of framing types.
6 Choose the PATTERN type and the PRBS POLARITY required.
STRUCTURED FRAMED
STRUCTURED