HP QMS 4060 - Manual (Page 99)

Emulations
4-65 Printer Configuration
Plotter
Identifies the HP-GL plotter type.
Scaling Percent
Identifies the percentage to reduce or enlarge an image.
» Note: To scale plots, select the paper size originally used for the plot
in the Paper Type menu and then enter the reduction or enlargement
needed to fit the plot on the new page in the Scaling Percent menu.
Menu Administration/Emulations/HPGL/Plotter
Choices 7475A—
7470A—
Colorpro—
7550A—
DraftMaster—Supports architectural and engineering
paper sizes (for example, A to E and Arch A to Arch
E). These paper sizes describe a mapping to the
physical paper. This mapping is a scaling factor (or a
size ratio) between the chosen paper size and the
physical paper size in the default inputbin. For
example if A3 is selected (size 11.69'' x 16.54'') for
paper size and the physical paper size in the default
inputbin is A4 (8.27'' x 11.69''), then the plot is scaled
by a factor of 2.
Default 7550A
Menu Administration/Emulations/HPGL/Scaling Percent
Choices 001-150 (1-150%)
Default 100 (100%)