HP QMS 4060 - Manual (Page 17)

Media Sizes and
Imageable
Areas
2-3 Print Media
The following table lists the size, imageable area, and feed edge (the
edge of the media drawn into the printer first) of all supported media
as well as information about their input, output, and finishing options:
Working Within the Imageable Area
The imageable areas for print media on your QMS 4060 Print System
may vary
1 / 16 " (1.6 mm). This is normal mechanical engine alignment
tolerances. You can adjust the alignment of the image in several dif-
ferent ways:
n
Adjust the margins or page size through your application.
n
Use the printer’s control panel (Administration/Engine/Image
Alignment menu).
n
Use the PostScript translate and scale operators to reduce
image size and change its placement on the page.
Media Media Size Imageable Area Feed
Edge
Input/
Output
Inches Millimeters Inches Millimeters
11x17 11.00x17.00 279.4x431.8 10.67x16.67 270.93x423.38 Short D, L, M, P, U
A3
A4
A5 11.69x16.54
11.69x8.27
5.85x8.27 297.0x420.0
297.0x210.0
148x210.0 11.35x16.20
7.93x11.35
5.48x7.94 288.21x411.48
201.51x288.21
139.12x201.55 Short
Long
Short D, L, M, P, U,
D, F, L, M, U
P D, D, L, M
U, P
B4 (JIS)
B5 (JIS) 10.12x14.33
7.17x10.12 257.0x364.0
182.0x257.0 9.77x13.998
6.87x9.78 248.24x355.56
173.40x248.50 Short
Short D, L, M, P, U
D, L, M, P, U
B4 (ISO)
B5 (ISO) 9.84x13.90
6.93x9.84 250x353
176x250 9.50x13.57
6.59x9.51 241.47x344.55
167.30x241.55 Short
Short C, D, P,
C, D, P
Executive 7.25x10.50 184.20x266.70 6.92x10.20 175.73x259.13 Short D, M, P
Legal
Letter 8.5x14.0
11.00x8.5 215.9x355.6
279.40x215.90 8.16x13.67
8.17x10.67 207.26x347.18
207.48x270.93 Short
Long D, L, M, P, U
D, F, L, M, P
U
Statement 5.50x8.50 139.7x215.9 5.16x8.17 131.06x207.48 Short C, D, P
*D=Duplexer, F=Large-Capacity Input Feeder, L=Lower tray, M=Middle tray, U=Upper tray,
P=Large-Capacity Output Stacker, C=Custom tray