HP QMS 4060 - Manual (Page 84)

Communications
QMS 4060 Print System Reference 4-50
Emulation
Sets the parallel interface emulation.
Minimum Number of Kilobytes for Spooling
Sets the minimum number of kilobytes of system memory allocated to
the parallel interface.
Menu Administration/Communications/Parallel/Emulation
Choices ESP, Hexdump, PostScript, PCL5e, HPGL,
Lineprinter
» Note: Other optional emulations, such as
LN03+, QUIC, TIFF, CALS, CCITT, and CGM,
also appear, if installed.
Default ESP
Menu Administration/Communications/Parallel/Min K Spool
Choices 00000-99999
Default 00015
Notes This value must be less than K Mem For Spool in the
administration/memory submenu.
A 00000 value does not turn off the spooling buffer for
the parallel interface. If the value is set to 00000, the
printer calculates the Min K Spool automatically at
initialization.
The printer must be restarted for changes to the Min
K Spool menu to take effect. You can either let the
printer restart automatically after you save the change
and exit the configuration menu, or you can wait for
the change to take effect the next time you manually
turn on the printer.