HP QMS 4060 - Manual (Page 51)

Operator Control
Menu
4-17 Printer Configuration
Copies
While it is preferable to use your application to select the number of
copies to print, you can change the default number of copies for all
print jobs through the printer control panel.
Duplexing
The Duplex option allows you to print on both sides of the paper.
Menu Operator Control/Copies
Choices 001-999
Default 001
Notes Sets the default number of copies for all subsequent
print jobs. When power is turned off and then back on
again, the number of copies is restored to the default
setting of 001.
Menu Operator Control/ Duplex
Choices Off, On
Off—Prints simplex pages.
On—Duplexes each page of each job.
Tumble—Prints jobs so they can be bound at the top
edge (flip-chart style).
Default Off
Notes If you want to print individual jobs duplex, leave the
printer set to Off and choose duplex through your
application.