HP QMS 4060 - Manual (Page 94)

Emulations
QMS 4060 Print System Reference 4-60
Line Termination
Indicates the default line termination mode. This setting specifies the
treatment of line feeds and carriage returns. (See Appendix C, “Docu-
ment Option Commands,” for more information on line termination).
Point Size x100
Sets the point size for scalable default fonts in units of hundreths of a
point. For example, a 24 point default point size is selected by enter-
ing 2400. The smallest increment allowed in point size is .25 point (for
example, 8.5 point and 8.75 point fonts are allowed, but 8.6 point is
not).
Menu Administration/Emulations/PCL 5E/Line Termination
Choices CR=CR LF=LF
CR=CR+LF LF=LF
CR=CR LF=CR+LF
CR or LF=CR+LF
Default CR=CR LF=LF
Menu Administration/Emulations/PCL 5E/Point Size x100
Choices 00025-99975 (0.25-999.75 points)
Default 01200 (12 points)
Notes If a nonscalable bitmap font is specified, the setting is
ignored.