HP QMS 4060 - Manual (Page 215)

Safety Standards
and General
Considerations
D-5 Notices
Safety Standards and General
Considerations
This printer has been designed to conform to recognized technical
standards, including the following national and international product
safety standards and norms:
n
UL 1950
n
U.S. CDRH 21CFR Ch. 1 Subch J
n
EN 60950 (IEC 950)
n
EN 60825 (IEC 825)
n
CSA C22.2 No. 950-95, Third Edition
Any unauthorized removal of safety covers, manipulation of safety
switches, and interference with the safety system is strictly prohibited.
Such actions can cause personal injury and can damage the system.
Also make sure that the operating and maintenance areas are not
obstructed in any way.
Laser Safety
This printer is certified as a Class 1 laser product under the U.S.
Department of Health and Human Services (DHHS) Radiation Perfor-
mance Standard according to the Radiation Control for Health and
Safety Act of 1968. This means that the printer does not produce haz-
ardous laser radiation.
Since radiation emitted inside the printer is completely confined within
protective housings and external covers, the laser beam cannot
escape from the machine during any phase of user operation.