HP QMS 4060 - Manual (Page 62)

Operator Control
Menu
QMS 4060 Print System Reference 4-28
Upper Inputbin
Use the Operator Control/Chain Option/Upper Chaining menu to
chain to the upper inputbin.
Custom Input Bins
This option allows you to set up the paper size for the optional custom
input tray. Since the tray can be installed in the upper, middle, or lower
tray positions there are three options under this menu—one for each
tray position.
Default On
Notes The Operator Control/Chain Option menu must be set
to On before the setting in this menu takes effect.
Menu Operator Control/Chain Option/Upper Chaining
Choices On—Allow media to be pulled from the upper inputbin
if necessary.
Off—Don’t allow media to be pulled from the upper
inputbin.
Default On
Notes The Operator Control/Chain Option menu must be set
to On before the setting in this menu takes effect.
Menu Operator Control/Custom Input Bin
Choices Upper, Middle, or Lower
Default The default setting for each tray position is letter
paper size.
Notes The choices for each tray position are letter, legal,
executive, A3, A4, A5, B4, B5, B4 (ISO), B5 (ISO),
11 x 17, Statement.