HP QMS 4060 - Manual (Page 83)

Communications
4-49 Printer Configuration
Setting Parallel Interface Parameters
Use the Administration/Communications/Parallel menu to set the par-
allel interface values used for printer-host communications.
Mode
The parallel interface supports Centronics parallel communication as
well as IEEE 1284 bidirectional parallel communication.
Default 00003 (3 sec.)
Notes A value of 00000 is the same as infinity (no timeout).
Menu Administration/Communications/Parallel/Mode
Choices Interactive—Establish two-way communication
between the host and the printer.
Noninteractive—Establish one-way communication
from the host to the printer.
Disabled—Turn off parallel communication with the
host. The printer stops accepting print jobs over the
parallel interface.
Default Noninteractive
Notes The printer must be restarted for changes to the
menu to take effect. You can either let the printer
restart automatically after you save the change and
exit from the Configuration menu, or you can wait for
the change to take effect the next time you manually
turn on the printer. See chapter 5, “Additional
Technical Information,” for a discussion of the
different modes.