HP TC4100 - Manual (Page 127)

125
Chapter 9 Specifications
Power Ratings
Table 9-7 displays the HP Server tc4100 power ratings.
Power Supply
Table 9-8 displays the HP Server tc4100 power requirements.
The power cord set found in your shipping box has been approved for use in the country where the Server was
purchased. If any other power cord set is used, it must meet appropriate safety requirements in the country in
which the Server is to be used.
Table 9-7. Power Ratings
AC Input Voltages
Maximum Input
Power (VA) Maximum Input
Power (W) Maximum Operating
Current RMS (AMPS)
100 VAC 650 643 6.5
120 VAC 640 628 5.3
208 VAC 625 605 3.0
230/240 VAC 630 603 2.6
Table 9-8. Power Supply Recommended (Single Unit)
Input Type Wide Range, PFC
Input Voltage and
Frequency 100-127VAC±10%;50/60Hz
200-240VAC±10%;50/60Hz
Power Availability 425 W continuous
Maximum Cold Inrush
Current per Power Cord 8 AMPs @ 120 VAC for <10ms
16 AMPs @ 240 VAC for <10ms
Table 9-9. General Cord Set Requirements
Cord Set
Approved or recognized by
a safety agency in the
country of use) 250 VAC, 10 A
125 VAC, 10 A
Maximum Length 2.4 m (8 ft)