Brother ADS-3100 High-Speed Desktop Color Scanner for Home & Small Offices - Manual (Page 185)

Home > Troubleshooting > Error and Maintenance Indications
Error and Maintenance Indications
Related Models : ADS-3100
The LED indications on the control panel are explained in this table.
If there is an error that you cannot clear yourself, contact your Brother dealer or Brother Customer Service.
Error Indicator Power Indicator Description
The LED is off.
The LED is on.
The LED is blinking.
Error Indicator Power Indicator Machine Status
Document Jam
Clear the document jam. If scanning a long document, select Long Paper from
the Scan Size or Document Size drop-down list.
Pick Up Document Error
The machine cannot pick up the document. Open the Front Cover and remove
the document. Close the Front Cover and reload your document.
Front Cover Open
The Front Cover is open.
Access Error
• Scan to PC
The USB cable is not connected to the machine. Connect the USB cable.
• Scan to USB
-
A USB flash drive is not inserted into the machine. Insert a USB flash
drive.
- The USB flash drive was removed while it was being accessed. Reinsert
the USB flash drive.
Unusable Device
An unsupported USB device is inserted in the USB port. Remove the device.
Too Many Files on USB (Scan to USB)
Your machine cannot save to a USB flash drive if it contains too many files.
Remove the USB flash drive, and then do one of the following:
•
Delete unused files or folders from the USB flash drive, and then try again.
• Use a USB flash drive that has available space.
Updating the Firmware
Firmware update in progress. Wait for the update to complete.
181