Brother ADS-3100 High-Speed Desktop Color Scanner for Home & Small Offices - Manual (Page 114)

Home > Network > Wireless Network Settings > Use the Wireless Network > Configure Your Machine for a
Wireless Network Using the One-Push Method of Wi-Fi Protected Setup ™ (WPS)
Configure Your Machine for a Wireless Network Using the One-Push
Method of Wi-Fi Protected Setup
™
(WPS)
Related Models : ADS-3300W
If your wireless access point/router supports Wi-Fi Protected Setup ™ (WPS), you can use WPS from your
machine's control panel menu to configure your wireless network settings.
1. Press [Settings] > [Network] > [WLAN(Wi-Fi)] > [WPS/Push Button] .
2. When [Enable WLAN? Do you want to continue?] appears, press [Yes] .
The wireless setup wizard starts. To cancel, press [No] .
3. When the touchscreen instructs you to start WPS, press the WPS button on your wireless access point/
router. Press [OK] , and then your machine automatically tries to connect to your wireless network.
If your wireless device is connected successfully, the LCD displays [Connected] .
You have completed the wireless network setup. To install drivers and software necessary for operating your
machine, go to your model's
Downloads page at support.brother.com .
Related Information
• Use the Wireless Network
110