Brother ADS-3100 High-Speed Desktop Color Scanner for Home & Small Offices - Manual (Page 180)

Home > Brother iPrint&Scan for Windows and Mac > Configure Scan to Workflow Settings Using Brother
iPrint&Scan
Configure Scan to Workflow Settings Using Brother iPrint&Scan
The following conditions must be satisfied to use Scan to Workflow:
•
Windows
-
The scanner driver is installed.
Download and install the driver at
support.brother.com .
- Default settings have been configured for scanning from the machine.
Configure the settings by following the on-screen directions in the
Machine Scan Settings screen.
• Mac
-
iPrint&Scan Push Scan Tool is installed.
Download and install the iPrint&Scan Push Scan Tool at support.brother.com .
- Default settings have been configured for scanning from the machine.
In the Brother iPrint&Scan home screen, click
Machine Scan Settings > Select folder... , and save
where applicable. Complete the process by following the on-screen instructions.
>> Create a Workflow
>> Configure Workflows
>> Edit or delete the Workflow
Create a Workflow
1. In the Brother iPrint&Scan home screen, click Create Workflow .
2. Create a workflow by following the on-screen instructions.
Configure Workflows
1. In the Brother iPrint&Scan home screen, click Machine Scan Settings > Workflow .
2. Select the workflow you want to display when the Workflow button is pressed on the machine, and click OK .
Edit or delete the Workflow
1. In the Brother iPrint&Scan home screen, click Application Setting > Workflow Management .
2. Select the workflow you want to edit or delete, and click either Edit or Delete .
Related Information
• Brother iPrint&Scan for Windows and Mac
176