Related information – Brother ADS-3100 High-Speed Desktop Color Scanner for Home & Small Offices User Manual
Page 184
Error Message
Cause
Action
Configure the Network Settings.
Server Time out
The machine was disconnected from the
Scan to FTP/SFTP profile, Scan to
Network profile or Scan to Email Server.
Make sure the Scan to FTP/SFTP profile,
Scan to Network profile or Scan to Email
Server is configured correctly.
Configure the Network Settings.
Unusable Device
An unusable device is inserted in the USB
port.
Remove the device. Turn off the machine
by unplugging the machine from the AC
power outlet, and then plug the machine
in again. Press
to turn on the
machine.
The inserted USB flash drive is write-
protected.
Use a USB flash drive that is not write-
protected.
USB Access Error
The USB flash drive was removed while it
was being accessed.
Insert the USB flash drive.
USB Hub Not Supported
A USB flash drive with a hub is inserted in
the USB port.
Remove the unsupported device from the
USB port.
Workflow not found
(ADS-3300W)
•
Workflow was not created.
•
Workflow was deleted.
•
Workflow was not configured correctly.
Make sure that Workflow is created and
configured correctly in Brother
iPrint&Scan (for Windows and Mac).
See
Related Information
:
Configure Scan
to Workflow Settings Using Brother
iPrint&Scan
.
Wrong Network Key
The Network Key is incorrect.
Confirm the Network Key and try again.
Related Information
•
Related Topics:
•
•
•
•
Set up a Scan to Network Profile
•
•
•
•
Configure Scan to Workflow Settings Using Brother iPrint&Scan
180