Xerox VersaLink C405/DN All-in-One Color Laser Printer - Manual (Page 90)

4. To adjust the highlight, midtone, and shadow density levels by color, touch the color that you
want to adjust, then move the sliders to increase or decrease the density levels.
5. Touch OK .
Adjusting the Saturation
1. At the printer control panel, press the Home button.
2. Touch Copy .
3. Touch Saturation .
4. To adjust the saturation, move the slider.
5. Touch OK .
Adding Color Effects
1. At the printer control panel, press the Home button.
2. Touch Copy .
3. Touch Color Effects .
4. Select the required option. A confirmation message appears.
5. To accept the new color settings, touch Apply .
A Addjjuussttiinngg C Coonnttrraasstt SSeettttiinnggss
You can adjust the variation between light and dark areas of your copy using the Contrast feature.
You can reduce the sensitivity of the printer to variations in light background colors using Auto
Background Suppression.
To adjust the Auto Background Suppression and Contrast:
1. At the printer control panel, press the Home button.
2. Touch Copy .
3. Touch Image Enhancement .
4. To enable Auto Background Suppression, touch the Auto Background Suppression toggle button.
5. To enable Auto Contrast, touch the Auto Contrast toggle button.
6. To adjust the Contrast manually, ensure that the Auto Contrast toggle button is off, then move
the slider to increase or decrease the contrast.
7. Touch OK .
C Chhaannggiinngg tthhee PPaaggee LLaayyoouutt
You can use Page Layout to place a defined number of pages on one or both sides of the paper.
To change the page layout:
1. At the printer control panel, press the Home button.
2. Touch Copy .
3. Touch Page Layout .
90 Xerox ® VersaLink ® C405 Color Multifunction Printer
User Guide
Xerox ® Apps