Xerox VersaLink C405/DN All-in-One Color Laser Printer User Manual
Page 46
a.
In the list of available Wi-Fi networks, touch the required network.
Note:
If the required Wi-Fi network is not listed, or if the required network uses WPS,
configure the connection manually. For details, refer to step 6.
b.
If needed, to log in to the network, type the password.
c.
To select a Wi-Fi frequency band, touch
Wi-Fi Band
, then select an option.
Note:
The Wi-Fi frequency band is set to AUTO by default.
d.
Touch
OK
.
6. To connect manually to a Wi-Fi Network:
a.
Touch
Manual Setup
.
b.
In the first field, type a name for the Wi-Fi network, then touch
Enter
.
c.
Touch
Network Type
, then select an option.
d.
Touch
Security
, then select an option.
e.
Touch
Wi-Fi Protected Setup (WPS)
, then select an option.
Note:
For a WPS setup with a Push Button Connection (PBC), select
PBC
.
f.
Touch
OK
.
C
Coonnffiigguurriinngg tthhee PPrriim
maarryy N
Neettw
woorrkk aatt tthhee C
Coonnttrrooll PPaanneell
You can set the primary network connection type at the device control panel.
Note:
• A Primary Network setup is required only if the optional Wi-Fi network connection kit is
installed and enabled.
• By default, without a Wi-Fi network connection, the primary network is set to Ethernet.
When the kit is installed and enabled, the device acquires two network connections. One
network connection is primary, and the other network connection is secondary.
• The following features are available only over the primary network connection:
–
IPsec
–
SMTP
–
SNTP
–
WSD scan
–
Scan to SFTP, Scan to SMB, Scan to Email
–
LDAP
–
UPnP discovery
–
ThinPrint
–
EIP Web Service
46
Xerox
®
VersaLink
®
C405 Color Multifunction Printer
User Guide