Xerox VersaLink C405/DN All-in-One Color Laser Printer - Manual (Page 192)

Moving the Printer
WARNING:
• To lift the printer, always use at least two people to grasp the hand holds on each side of
the printer.
• To prevent you from dropping the printer or injury, lift the printer firmly by gripping the
recessed areas on both sides of the printer. Never lift the printer by gripping any other areas.
• If optional 550-Sheet Feeders are installed, uninstall them before you move the printer. If
the optional 550-Sheet Feeders are not fixed to the printer securely, they can fall to the
ground and cause injury.
Follow these instructions when moving the printer:
1. Power off the printer, then disconnect the power cord and other cables from the back of the
printer.
WARNING: To prevent electric shock, never touch the power plug with wet hands. When
removing the power cord, ensure that you pull the plug and not the cord. Pulling the cord
can damage it, which can lead to fire or electric shock.
2. Remove any paper or other media from the output tray. If the output tray extension is extended,
close it.
192 Xerox ® VersaLink ® C405 Color Multifunction Printer
User Guide
Maintenance