HP MFP M528f Monochrome Laser Printer - Manual (Page 92)

Option two: Search network for outgoing email server
a. Select Search network for outgoing email server, and then click Next.
b. Select the appropriate server from the Configure Email Server (SMTP) list, and then click Next.
c. Select the option that describes the server’s authentication requirements:
– Server does not require authentication: Select Server does not require authentication, and then
click Next.
-OR-
– Server requires authentication: From the drop-down list, select an authentication option:
○ Use credentials of user to connect after Sign In at the control panel: Select Use credentials
of user to connect after Sign In at the control panel, and then click Next.
-OR-
○ Always use these credentials: Select Always use these credentials, enter the User name
and Password, and then click Next.
Option three: Add SMTP server
a. Select Add SMTP server
b. Enter the Server Name and Port Number, and then click Next.
NOTE: In most cases, the default port number does not need to be changed.
NOTE: If you are using a hosted SMTP service such as Gmail, verify the SMTP address, port number,
and SSL settings from the service provider’s website or other sources. Typically, for Gmail, the SMTP
address is smtp.gmail.com, port number 465, and the SSL should be enabled.
Please refer to online sources to confirm these server settings are current and valid at the time of
configuration.
c. Select the appropriate server authentication option:
– Server does not require authentication: Select Server does not require authentication, and then
click Next.
-OR-
– Server requires authentication: Select an option from the Server requires authentication drop-
down list:
○ Use credentials of user to connect after Sign In at the control panel: Select Use credentials
of user to connect after Sign In at the control panel, and then click Next.
-OR-
○ Always use these credentials: Select Always use these credentials, enter the User name
and Password, and then click Next.
5. On the Configure Email Settings dialog, enter the following information about for the sender’s email
address, and then click Next.
78 Chapter 6 Scan ENWW