Try a different print driver, Check the economode settings – HP MFP M528f Monochrome Laser Printer User Manual
Page 208
3.
Select
Tray
, and then select the tray to adjust.
4.
Select
Print Test Page
, and then follow the instructions on the printed pages.
5.
Select
Print Test Page
again to verify the results, and then make further adjustments if necessary.
6.
Select
Done
to save the new settings.
Try a different print driver
Try a different print driver when printing from a software program and the printed pages have unexpected lines
in graphics, missing text, missing graphics, incorrect formatting, or substituted fonts.
Download any of the following drivers from the HP Web site:
HP PCL.6 driver
If available, this printer-specific print driver supports older operating systems like Windows
®
XP and Windows Vista
®
. For a list of supported operating systems, go to
.
HP PCL 6 driver
This printer-specific print driver supports Windows 7 and newer operating systems that
support version 3 drivers. For a list of supported operating systems, go t
.
HP PCL-6 driver
This printer-specific print driver supports Windows 8 and newer operating systems that
support version 4 drivers. For a list of supported operating systems, go t
.
HP UPD PS driver
●
Recommended for printing with Adobe
®
software programs or with other highly
graphics-intensive software programs
●
Provides support for printing from postscript emulation needs, or for postscript flash
font support
HP UPD PCL 6
●
Recommended for printing in all Windows environments
●
Provides the overall best speed, print quality, and printer feature support for most
users
●
Developed to align with Windows Graphic Device Interface (GDI) for best speed in
Windows environments
●
Might not be fully compatible with third-party and custom software programs that are
based on PCL 5
Check the EconoMode settings
HP does not recommend the full-time use of EconoMode. If EconoMode is used full-time, the toner supply might
outlast the mechanical parts in the toner cartridge. If print quality begins to degrade and is no longer acceptable,
consider replacing the toner cartridge.
NOTE:
This feature is available with the PCL 6 print driver for Windows. If you are not using that driver, you can
enable the feature by using the HP Embedded Web Server.
Follow these steps if the entire page is too dark or too light.
1.
From the software program, select the Print option.
2.
Select the printer, and then click the Properties or Preferences button.
3.
Click the Paper/Quality tab, and locate the Print Quality area.
194 Chapter 9 Solve problems
ENWW