General fax send settings, Fax receive settings, General fax send settings fax receive settings – HP MFP M528f Monochrome Laser Printer User Manual
Page 144

Menu item
Description
Dialing Mode
The
Dialing Mode
setting sets the type of dialing that is used: either tone (touch-tone
phones) or pulse (rotary-dial phones).
Dialing Prefix
The
Dialing Prefix
setting allows you to enter a prefix number (such as a "9" to access an
outside line) when dialing. This prefix number is automatically added to all phone numbers
when dialed.
Detect dial tone
The
Detect dial tone
setting determines whether the fax checks for a dial tone before
sending a fax.
General fax send settings
1.
From the Home screen on the printer control panel, navigate to the
Settings
application, and then select
the
Settings
icon.
2.
Open the following menus:
●
Fax
●
Fax Send Settings
●
General Fax Send Settings
Configure any of the following settings, and then select
Done
:
Menu item
Description
Fax Number Confirmation
When the
Fax Number Confirmation
feature is enabled, the fax number must be entered
twice to ensure that it was entered correctly. The feature is disabled by default.
PC Fax Send
Use the
PC Fax Send
feature to send faxes from a PC. This feature is enabled by default.
Error Correction Mode
Normally, the fax accessory monitors the signals on the telephone line while it is sending or
receiving a fax. If the fax accessory detects an error during the transmission and the
Error
Correction Mode
setting is on, the fax accessory can request that the error portion of the
fax be sent again.
The
Error Correction Mode
feature is enabled by default. You should turn it off only if you
are having trouble sending or receiving a fax and if you are willing to accept the errors in the
transmission and a probable quality reduction in the image. Turning off the setting might be
useful when you are trying to send a fax overseas or receive one from overseas, or if you
are using a satellite telephone connection.
NOTE:
Some VoIP providers might suggest turning off the
Error Correction Mode
setting.
However, this is not usually necessary.
Fax Header
Use the
Fax Header
feature to control whether the header is appended to the top, and
content is shifted down, or if the header is overlaid on top of the previous header.
Fax receive settings
1.
From the Home screen on the printer control panel, navigate to the
Settings
application, and then select
the
Settings
icon.
2.
Open the following menus:
130 Chapter 7 Fax
ENWW