HP MFP M528f Monochrome Laser Printer - Manual (Page 123)

Set up Scan to USB Drive
● Introduction
● Step one: Access the HP Embedded Web Server (EWS)
● Step two: Enable Scan to USB Drive
● Step three: Configure the Quick Sets (optional)
● Default scan settings for Scan to USB Drive setup
● Default file settings for Save to USB Setup
Introduction
The printer has a feature that enables it to scan a document and save it to a USB flash drive. The feature is not
available until it has been configured through the HP Embedded Web Server (EWS).
Step one: Access the HP Embedded Web Server (EWS)
Open the EWS to start the set-up process.
1. From the Home screen on the printer control panel, touch the Information icon, and then touch the
Network icon to display the IP address or host name.
2. Open a web browser, and in the address line, type the IP address or host name exactly as it displays on the
printer control panel. Press the Enter key on the computer keyboard. The EWS opens.
NOTE: If the web browser displays a message indicating that accessing the website might not be safe,
select the option to continue to the website. Accessing this website will not harm the computer.
ENWW Set up Scan to USB Drive 109