HP MFP M528f Monochrome Laser Printer - Manual (Page 232)

The printer is using incorrect link and duplex settings for the network
HP recommends leaving these settings in automatic mode (the default setting). If you change these settings, you
must also change them for your network.
New software programs might be causing compatibility problems
Verify that any new software programs are correctly installed and that they use the correct print driver.
The computer or workstation might be set up incorrectly
1. Check the network drivers, print drivers, and the network redirection settings.
2. Verify that the operating system is configured correctly.
The printer is disabled, or other network settings are incorrect
1. Review the printer’s configuration/networking pages to check the status of the network settings and
protocols.
2. Reconfigure the network settings if necessary.
218 Chapter 9 Solve problems ENWW