KORG Pa300 Arranger - Manual (Page 34)

30 Connecting and calibrating the Damper pedal
Programming the Damper pedal
4
Touch the Foot Contr. tab to select the “Foot Controllers” page.
This is the page where you can program the PEDAL/DAMPER connector, by assigning it one of
the available functions.
5
Be sure the Damper function is assigned to the “Function” parameter.
6
Touch the “Calibration” button, to make the “Damper & Pedal/Footswitch Calibration”
dialog box appear.
7
Fully press the Damper pedal down, and while continuing to press touch the “Push”
button to confirm the maximum value.
8
When the following dialog box appears, release the pedal.
9
Touch the “Push” button in the display to confirm the minimum value.
Check if the pedal is working properly. In case it isn’t, repeat the procedure.
10
Press the EXIT button to return to the previous operative mode.