Controllers: hand controllers, Keyboard settings, Controllers: foot controllers – KORG Pa300 Arranger User Manual
Page 159: Pedal/footswitch, E “controllers: foot controllers” p, E “pedal/ footswitch” p
155
Global
Controllers: Hand Controllers
Re
fe
rence
Controllers: Hand Controllers
In this page you can program the keyboard’s velocity curve.
Keyboard Settings
Velocity Curve
This parameter sets the sensitivity of the keyboard to your touch.
Fix
No dynamic control available. Dynamic values
are fixed, as in a classic organ.
Soft1 … Hard3
Curves, from the lightest one to the hardest one.
Controllers: Foot Controllers
This page lets you select a function to the Pedal/Footswitch, and
select its polarity and calibrate its action.
The following (optional) Korg pedals are compatible with Pa300:
Pedal/Footswitch
Function
Function assigned to a continuous (i.e., volume/expression)
pedal, or to a footswitch, connected to the PEDAL/DAMPER
connector. See page 354 for a list of the assignable functions. The
first functions are switch-type functions, while the remaining
(starting from Master Volume) are continuous-like functions.
Calibration
Use this button to calibrate and choose the polarity of the pedal/
footswitch.
1.
Connect the pedal or footswitch to the PEDAL/DAMPER
connector on the back of the instrument.
2.
Go to this page, and touch the “Calibration” button in the
display. The following dialog box appears:
3.
You are asked to set the pedal to the maximum value. Press
the footswitch, or press the pedal to the maximum position
(usually front pressed).
4.
Touch the “Push” button in the display to confirm the max-
imum value. The following dialog box appears:
5.
You are now asked to set the pedal to the minimum value.
Release the footswitch, or press the pedal to the minimum
position (usually back pressed).
6.
Touch the “Push” button in the display to confirm the min-
imum value.
7.
Check if the pedal or footswitch is working properly, and
assign it a function.
Note:
After loading a new Operating System, an older Global file,
a “SET” folder containing a Global file, or a Backup file, you might
need to re-calibrate the pedal/footswitch.
Type
Model
Continuous
(Volume/Expression)
EXP2, XVP10
Switch
PS1, PS3
Damper
DS1H