KORG Pa300 Arranger - Manual (Page 33)

29 Connecting and calibrating the Damper pedal
Programming the Damper pedal
Quick Guide
If you want to play Piano, you will want to connect a Damper pedal to sustain notes while playing.
You can connect a Korg PS1, PS3 or DS1H to the PEDAL/DAMPER connector on the back of the
instrument.
Programming the Damper pedal
Calibrating the Damper pedal will let you use the full run of the pedal, without “dead spots”. Also, this
might be the only way to connect a third-party Damper pedal that seems to work in reverse, sustain-
ing the notes when they are not pressed!
1
Connect the Damper pedal to the PEDAL/DAMPER connector on the back of the instru-
ment.
2
Press the GLOBAL button to access the Global mode.
Global mode is where you can set some global parameters, like this one or the Master Tuning.
These settings are not tied to any specific operative mode, so they are programmed in these sep-
arate pages.
3
Touch the Controllers button to access the Controllers section of the Global mode.
If you have not yet chosen a different page, the “Hand Controller” page will appear (being the
first one in the Controllers section).
Connecting and calibrating the Damper pedal
Damper/Assignable pedal connector
Menu of the Global mode