Extreme Networks 200 Series - Manual (Page 281)

Reviewing ExtremeWare Vista Statistical Reports
Summit 200 Series Switch Installation and User Guide 279
OSPF —The OSPF routing protocol for the switch. The setting is either enabled or disabled.
Advertisement Address —The destination address of the router advertisement messages.
Maximum Interval —The maximum time between router advertisements. The default setting is 600
seconds.
Minimum Interval —The minimum amount of time between router advertisements. The default setting
is 450 seconds.
Lifetime —The client aging timer setting, the default is 1,800 seconds.
Preference —The preference level of the router. An IRDP client always uses the router with the highest
preference level. The default setting is 0.
Bootp Relay —The BOOTP relay service on the switch. The setting is either enabled or disabled; the
default is disabled.
Figure 72: IP Configuration Statistics
Router Interface Statistics
The Router Interface Statistics table gives the details of individual VLANs. It contains the following
fields:
VLAN name
State —up or down
IP Address —in dotted-quad notation