Extreme Networks 200 Series - Manual (Page 205)

Resetting and Disabling Router Settings
Summit 200 Series Switch Installation and User Guide 203
Resetting and Disabling Router Settings
To return router settings to their defaults and disable routing functions, use the commands listed in
Table 59
Table 58: Router Show Commands
Command Description
show iparp { |
permanent} Displays the IP Address Resolution Protocol
(ARP) table. You can filter the display by IP
address, VLAN, or permanent entries.
show iparp proxy { {}} Displays the proxy ARP table.
show ipconfig {vlan } Displays configuration information for one or
all VLANs.
show ipconfig {vlan } {detail} Displays IP configuration settings.
show ipfdb { | vlan
} Displays the contents of the IP forwarding
database (FDB) table. If no option is
specified, all IP FDB entries are displayed.
show iproute {priority | vlan | permanent |
| origin [direct | static |
blackhole | rip | bootp | icmp | ospf-intra |
ospf-inter | ospf-as-external | ospf-extern1 |
ospf-extern2]} {sorted} Displays the contents of the IP routing table
or the route origin priority.
show ipstats {vlan } Displays IP statistics for the CPU of the
system.
Table 59: Router Reset and Disable Commands
Command Description
clear iparp { | vlan } Removes dynamic entries in the IP ARP table.
Permanent IP ARP entries are not affected.
clear ipfdb { | vlan
] Removes the dynamic entries in the IP
forwarding database. If no options are specified,
all IP FDB entries are removed.
disable bootp vlan [ | all] Disables the generation and processing of
BOOTP packets.
disable bootprelay Disables the forwarding of BOOTP requests.
disable icmp address-mask {vlan } Disables the generation of an ICMP
address-mask reply messages. If a VLAN is not
specified, the command applies to all IP
interfaces.
disable icmp parameter-problem {vlan
} Disables the generation of ICMP
parameter-problem messages. If a VLAN is not
specified, the command applies to all IP
interfaces.
disable icmp port-unreachables {vlan
} Disables the generation of ICMP port
unreachable messages. If a VLAN is not
specified, the command applies to all IP
interfaces.
disable icmp redirects {vlan } Disables the generation of ICMP redirect
messages. If a VLAN is not specified, the
command applies to all IP interfaces.