Roland TD-27KV2 V-Drums Electronic Drum Kit - Manual (Page 67)

67
Troubleshooting
Trouble Items to check Action Page
Troubles with USB
Can’t communicate
with a computer
Is the USB cable connected correctly? Check the connections. p. 10
In order to transmit and receive audio as USB AUDIO,
the USB driver must be installed.
Install the USB driver on your computer. p. 28
Are you using a cable that supports USB 2.0?
The product cannot be used the cable that supports
USB 3.0. Use the cable that supports USB 2.0.
–
Have the settings for “Driver Mode” been made
correctly?
Choose the setting that’s appropriate for your
situation.
p. 58
Troubles with MIDI
No sound
Are the MIDI cables connected correctly? Check the connections. p. 10
Is the MIDI channel set correctly?
Set the MIDI channels of the product and external
MIDI device to the same setting.
p. 59
Has the note number been set properly? Set the pad’s “NOTE NO.” p. 59
Problems with Bluetooth functionality
Problem Items to check/Action Page
“TD-27” is not shown
on your smartphone
Could this unit’s Bluetooth function be
“OFF”?
Turn this unit’s Bluetooth function “ON.”
[SYSTEM]
0 “Bluetooth” 0 [F5] (ON)
Bluetooth audio function:
When you initiate pairing ([F1] button), the device name
“TD-27 AUDIO” appears on your smartphone.
Bluetooth MIDI function:
[F2] (SETUP) 0 “Bluetooth MIDI” 0 ON
Initiate pairing from the settings of your Bluetooth MIDI
compatible app (such as Garage Band).
p. 46
Can’t connect to
Bluetooth audio
If your smartphone’s Bluetooth device list
shows “TD-27 AUDIO”
In your smartphone’s settings, temporarily remove the
registration of the “TD-27 AUDIO” Bluetooth device, turn
the Bluetooth function off and then on again, and execute
pairing once again.
–
If your smartphone’s Bluetooth device list
does not show “TD-27 AUDIO”
In your smartphone’s settings, turn the Bluetooth function
off and then on again, and then initiate pairing from the TD-27
to pair it once again.
–
Can’t connect to
Bluetooth MIDI
For the Bluetooth MIDI function, you’ll execute pairing not via the Bluetooth settings of your smartphone,
but by using the settings within your Bluetooth MIDI compatible app (such as Garage Band). Even if your
smartphone’s Bluetooth device list shows “TD-27 MIDI,” do not tap it. If you tapped it by mistake, cancel “TD-27
MIDI,” turn the Bluetooth function off and then on again, and make the connection again.
–
A paired smartphone
does not connect
If connection occurs but is immediately broken, turning the smartphone’s Bluetooth function off and
then on again might make connection succeed.
01