Roland TD-27KV2 V-Drums Electronic Drum Kit - Manual (Page 60)

Making Various Settings (SYSTEM)
Making Option Settings (OPTION)
Here you can make settings for the MIX IN jack’s input
level and the display contrast, and assign functions to the
footswitches and pads.
1
Press the [SYSTEM] button.
The SYSTEM screen appears.
2
Use the cursor buttons to select “OPTION” and
press [ENTER] button.
The option settings screen appears.
3
Press the [F1] (MIX IN)–[F4] (MODIFY) buttons
to select the item that you want to edit.
Button Explanation
[F1] (MIX IN)
Adjusts the input level of the MIX IN jack and
Bluetooth audio.
[F2] (LCD)
Adjusts the contrast and brightness of the
display.
[F3] (CTRL)
Assigns functions to the footswitches and
pads.
[F4] (MODIFY)
Specifies the duration for which to display
the window that briefly appears when you
turn a sound modify knob.
Reference
For details on the parameters that can be edited, refer to
“Data List” (PDF).
4
Use the cursor buttons to select a parameter
and turn the dial to edit the value.
5
Press the [DRUM KIT] button to return to the
DRUM KIT screen.
Assigning Functions to Footswitches or
Pads (CONTROL)
Footswitches (BOSS FS-5U, FS-6; sold separately) or pads
that are connected to the TD-27 can be assigned to control
functions such as switching drum kits or switching set lists.
Reference
For details on the parameters that can be edited, refer to
“Data List” (PDF).
Assigning a function to a footswitch
Connecting an FS-5U
SW2 SW1
TIP
Stereo 1/4” phone type
1/4” phone type x 2
RING
POLARITY switch
* If you use a mono cable to connect a single FS-5U, it will
operate as SW 2.
* The FS-5L cannot be used.
Connecting an FS-6
Stereo 1/4” phone type
Stereo 1/4” phone type
SW2
SW1
MODE/POLARITY switch
1
Press the [SYSTEM] button.
The SYSTEM screen appears.
2
Use the cursor buttons to select “OPTION” and
press [ENTER] button.
The option settings screen appears.
3
Press the [F3] (CTRL) button.
FOOT SWITCH/PAD CONTROL screen appears.
4
Use the cursor buttons to select a parameter,
and use the dial to edit the value.
MEMO
If you want to switch drum kits in the set list (p. 18) by
striking a pad, set the pad’s assigned function to “KIT#
DEC” or “KIT# INC,” and then turn on set lists in the DRUM
KIT screen. (Make the set list setting in advance.)
60