Editing with the [kit edit] button, Editing a drum kit – Roland TD-27KV2 V-Drums Electronic Drum Kit User Manual
Page 31

31
Editing a Drum Kit
Editing with the [KIT EDIT] Button
1
Press the [DRUM KIT] button.
The DRUM KIT screen appears.
2
Turn the dial to select the drum kit that you want to edit.
3
Press the [KIT EDIT] button.
The KIT EDIT screen appears.
4
Strike the pad that you want to edit.
To select the rim of a pad, strike the rim.
MEMO
By holding down the [ENTER] button and pressing the [SYSTEM] button, you can prevent the pad you’re editing from being
switched. This is convenient if you’re playing a phrase while you edit.
5
Use the cursor buttons to select the parameter that you want to edit, and press [ENTER] button.
Parameter
Screen
Explanation
INSTRUMENT
INSTRUMENT Screen
SUB INSTRUMENT Screen
Changes the type of instrument.
You can also edit the settings of each instrument, such as the
type of head, the depth of the shell, and the ambience.
You can layer the main instrument with a sub instrument so
that they are heard together.
MEMO
5
When the INSTRUMENT screen or the SUB INSTRUMENT
screen is shown, press the [ENTER] button to access the
instrument list.
5
An audio file that you created on your computer can be
loaded from an SD card into this unit, and played or edited
as an instrument “Importing and Playing Audio Files
TRANSIENT
Boost or suppress the attack or release portions of the
instrument (Transient).
* This cannot be specified for user samples.
PAD VOL
Adjust the volume and pan (stereo position) of each pad, and
the volume of the entire drum kit.
PAD EQ
Adjusts the tonal character of each pad (pad equalizer).
Adjust the tonal character by boosting or cutting each of three
bands (LOW, MID, HIGH).