Roland TD-27KV2 V-Drums Electronic Drum Kit - Manual (Page 47)

47
Making Various Settings (SYSTEM)
Backing Up Data to an SD Card (SD CARD)
Settings stored in the TD-27 can be saved (backed up) to an
SD card, or loaded into the TD-27.
Backing Up All Settings (SAVE)
Here’s how all settings stored in the TD-27 can be backed up
as a single set to an SD card (up to 99 sets).
MEMO
You can also back up or load drum kits individually
(p. 48).
1
Insert an SD card into the TD-27 (p. 11).
2
Press the [SYSTEM] button.
The SYSTEM screen appears.
3
Use the cursor buttons to select the “SD CARD”
and press the [ENTER] button.
The SD CARD MENU screen appears.
4
Move the cursor to the “SAVE” and press the
[ENTER] button.
The SD CARD SAVE screen appears.
5
Make backup settings.
Parameter Explanation
With User Sample
Select whether user samples are also
backed up.
Bank Number Select the backup number.
* If you back up user samples as well, it may take several
minutes to save the data depending on the size of the
user samples. If you don’t back up user samples, and you
then delete user samples or renumber them, the drum
kit won’t be reproduced correctly even if you load the
backup.
6
Press the [F5] (SAVE) button.
MEMO
If you want to assign a name to the backup data, press
the [F4] (NAME) button and assign a name (p. 39).
7
Press the [F5] (EXECUTE) button.
A confirmation message appears.
If you decide to cancel, select “CANCEL” and press the
[ENTER] button.
8
Use the cursor buttons to select “OK,” and press
the [ENTER] button.
The backup data is saved on the SD card.
Loading Backup Data from an SD Card
(LOAD)
Here’s how backup data that was saved on an SD card can be
loaded into the TD-27.
1
Insert an SD card into the TD-27 (p. 11).
2
Press the [SYSTEM] button.
The SYSTEM screen appears.
3
Use the cursor buttons to select the “SD CARD”
and press the [ENTER] button.
The SD CARD MENU screen appears.
4
Use the cursor buttons to select the “LOAD”
and press the [ENTER] button.
The SD CARD LOAD screen appears.
5
Make load settings.
Parameter Explanation
With User Sample
Select whether user samples are also
loaded.
Bank Number Select the backup number.
* When you load user samples, the user samples included in
the backup data are overwritten onto the user samples in
user memory. Depending on the size of the user samples,
it might take ten minutes or more to load the data.
* If you are loading backup data that does not include user
samples, you can’t select the “With User Sample” check
box.