Roland TD-27KV2 V-Drums Electronic Drum Kit - Manual (Page 62)

62
Making Various Settings (SYSTEM)
Viewing Information for the TD-27 Itself
(INFO)
Here’s how to view information for the TD-27 unit itself, such
as its program version.
1
Press the [SYSTEM] button.
The SYSTEM screen appears.
2
Use the cursor buttons to select “INFO” and
press [ENTER] button.
The option settings screen appears.
3 Press a [F1] (PROGRAM)–[F4] (DIGITAL) button
to select the item that you want to edit.
Button Explanation
[F1] (PROGRAM) Displays the program version.
[F2] (SAMPLE)
Displays the number of loaded user
samples and the remaining amount of
space for user samples in user memory.
[F3] (SD CARD)
Displays the number of backup data and kit
backup data that are saved on the SD card.
[F4] (DIGITAL)
Displays the program version of the digital
connection compatible pads that are
connected to the TD-27.
The FUNC button of the selected pad is
blinking.
4
Press the [DRUM KIT] button to return to the
DRUM KIT screen.
Restoring the Factory Settings
(FACTORY RESET)
The “Factory Reset” operation returns all data and settings
stored in the TD-27 to their factory-set condition.
NOTE
When you execute this operation, all data and settings
in the TD-27 will be lost. Before you proceed, you should
save any important data and settings to your SD card
(p. 47).
1
Press the [SYSTEM] button.
The SYSTEM screen appears.
2
Use the cursor buttons to select “FACTORY
RESET,” and press [ENTER] button.
The FACTORY RESET screen appears.
MEMO
If you want all user samples to also be returned to
their factory-set state, use the dial to add a check mark
to “Reset with User Sample.” All user samples in user
memory are overwritten by the factory-set data.
3
Press the [F5] (FACTORY RESET) button.
A confirmation message appears.
If you decide to cancel, select “CANCEL” and press the
[ENTER] button.
4
Use the cursor buttons to select “OK,” and press
the [ENTER] button.
The “Factory Reset” operation will be executed.