Roland TD-27KV2 V-Drums Electronic Drum Kit - Manual (Page 64)

64
Error Messages
List of Displayed Messages
Message Meaning Action
Format SD Card Error! Failed to format the SD card.
Insert an SD card correctly.
Unlock the SD card.
Incorrect File! The backup data or the kit backup data is damaged. Do not use this data.
MIDI Buffer Full!
A large amount of MIDI messages were received
in a short time, and could not be processed
completely.
Confirm that the external MIDI device is properly
connected. If the problem persists, reduce the amount
of MIDI messages sent to the TD-27.
MIDI Offline!
A MIDI cable or USB cable is disconnected
(alternatively, communication with the external
MIDI device was interrupted for some reason).
Make sure that the MIDI cable or USB cable is not
disconnected or broken.
No Backup Data! There is no backup data on the SD card. –
No Data!
You attempted to export a song for which recorded
data does not exist.
Export a song for which recorded data exists.
No SD Card! No SD card is in the SD card slot. Insert an SD card correctly.
Temporary Memory Full!
The storage capacity of the song recorder is full,
and recording has stopped. The maximum recording time is approximately 60
minutes if an SD card is inserted, or approximately
three minutes if an SD card is not inserted. Song Data Too Long!
Recording stopped because you have exceeded the
maximum length of time possible with an SD card
inserted.
Sample Length Too Long! The audio file is too long, and cannot be imported. Files longer than 180 seconds cannot be imported.
Sample Length Too Short! The audio file is too short, and cannot be imported. In some cases, audio files shorter than one second
cannot be imported.
SD Card is Locked!
The SD card is locked. Unlock the SD card.
The file attribute is read-only. Clear the read-only attribute of the file.
SD Card is not connected! No SD card is in the SD card slot. Insert an SD card correctly.
SD Card Media Error!
The contents of SD card are damaged.
Copy the necessary data from the SD card, and then
format the SD card on the TD-27 (p. 50). If this does
not solve the problem, try a different SD card.
Failed to save recorded data. Check the lock status of the SD card.
Failed to export the song. Check whether the file might be write-protected.
SD Card Memory Full! There are no empty space on the SD card. Delete unneeded data (p. 49).
System Overload! The TD-27’s processing could not keep up. Reduce the number of notes that play simultaneously.
Unsupported format! The TD-27 does not support this format.
Check whether this file format can be played
(song (p. 22), user sample (p. 35)).
User Sample Does Not Exist! User samples do not exist. Select a location where user samples exist.
User Sample Exists! User samples exist. Delete the user samples, or select a vacant location.
User Sample Import Error!
The audio data to be imported is damaged. Do not use this audio data.
The data on the SD card is damaged. Do not use this SD card.
User Sample Memory Error!
The backup data or kit backup data including user
samples is damaged.
Do not use this data.
The data on the SD card is damaged. Do not use this SD card.
An empty user sample is assigned. (Only for 1 KIT
SAVE)
You can’t use 1 KIT SAVE for a kit to which empty user
samples are assigned.
User Sample memory full! There is no free user sample space. Delete unneeded user sample (p. 37).