Roland TD-27KV2 V-Drums Electronic Drum Kit - Manual (Page 27)

27
Recording
Recording a Performance
You can easily record your own performance and play it
back.
MEMO
Recording is required SD card. If there is no SD card,
approximately three minutes of temporary recording are
possible, but this cannot be saved to internal memory.
Recording
* If you want to save (export) your recorded song to an SD
card, insert the SD card before you continue (p. 11).
* The maximum recording time is approximately 60
minutes if an SD card is inserted, or approximately three
minutes if an SD card is not inserted.
1
Press the [ t ] button.
The REC STANDBY screen appears, and TD-27 is in the
record-standby condition.
MEMO
If you want to record along with a click (metronome),
sound the click at this point (p. 24).
2
Turn the dial to select what will be recorded.
Display Explanation
ALL
Record all sound (except for the click and
the click track).
DRUMS ONLY Record only the sound of the drums.
3
Press the [ s ] button to start recording.
4
Press the [ s ] button once again to stop
recording.
Playback and saving
5
Press the [F5] (PREVIEW) button.
The recorded performance plays back.
If you want to exit without saving the song to the SD
card, press the [F1] (DELETE) button.
6
Press the [F4] (EXPORT) button to save the
song.
A confirmation message appears.
7
Use the cursor buttons to select “OK,” and
press the [ENTER] button.
The song is saved on the SD card.
Recording Your Performance Along with a Song
You can record your performance along with one of the
TD-27’s built-in backing (accompaniment) songs or a song
saved on the SD card.
MEMO
If you want to record along with a song from your
smartphone connected via the MIX IN jack or via
Bluetooth, play back the song on your smartphone while
you record as described in “Recording a Performance.”
Selecting and recording a song
1
Press the [SONG] button.
The SONG screen appears.
2
Use the dial to select the song that you want
to record along with.
Each time you press the [F1] button, you cycle between
built-in songs (INTERNAL), audio files on the SD card
(SD CARD), and songs recorded (exported) to the SD card
(REC DATA).
* You can’t record along with a built-in demo performance.
3
Press the [ t ] button.
The REC STANDBY screen appears, and TD-27 is in the
record-standby condition.
4
Use the dial to select “ALL” as the recording
target.
5
Press the [F1] (with SONG) button.
6
Press the [ s ] button to start recording.
TD-27 starts recording and the song starts playing.
7
Press the [ s ] button once again to stop
recording.
Playback and saving
8
Press the [F5] (PREVIEW) button.
The recorded performance plays back.
If you want to exit without saving the song to the SD
card, press the [F1] (DELETE) button.
9
Press the [F4] (EXPORT) button to save the
song.
A confirmation message appears.