Roland TD-27KV2 V-Drums Electronic Drum Kit - Manual (Page 55)

55
Making Various Settings (SYSTEM)
6
Press the [F5] (SET) button.
In this case, the value is automatically set to “33,” which is
the minimum value that can cancel triggering for crash
1.
Value Explanation
0–80 Strength of crosstalk cancellation
* The value will not exceed 40 when you set crosstalk
cancellation automatically. If you need to set this value
above 40, use the dial to edit the value.
7
Repeat steps 5 and 6 to make crosstalk
cancellation settings.
MEMO
You can also use the cursor buttons, the dial to make
crosstalk cancellation settings manually.
Audio Output Assignments (OUTPUT)
Here’s how to assign the audio outputs from the MASTER
OUT jacks, DIRECT OUT jacks, and PHONES jacks.
MEMO
USB audio (p. 58) output channels 1-2 share output
settings with the MASTER OUT jacks, and output
channels 3-4 share output settings with the DIRECT OUT
jacks.
1
Press the [SYSTEM] button.
The SYSTEM screen appears.
2
Use the cursor buttons to select “OUTPUT” and
press [ENTER] button.
[F1] (PAD MAS) button
Specify each pad’s output assignments for the PHONES jacks
and MASTER OUT jacks (when OUTPUT ROUTING Master Out is
set to “NORMAL”).
[F2] (PAD DIR) button
Specify each pad’s output assignments for the DIRECT OUT
(1, 2) jacks and MASTER OUT jacks (when OUTPUT ROUTING
Master Out is set to “DIRECT”).
[F3] (OTHER MAS) button
Specify the ROOM and MFX output assignments for the
PHONES jacks and MASTER OUT jacks (when OUTPUT
ROUTING Master Out is set to “NORMAL”).
[F4] (OTHER DIR) button
Specify the ROOM and MFX output assignments for the
DIRECT OUT (1, 2) jacks and MASTER OUT jacks (when OUTPUT
ROUTING Master Out is set to “DIRECT”).