Roland TD-27KV2 V-Drums Electronic Drum Kit - Manual (Page 61)

61
Making Various Settings (SYSTEM)
5
Press the [DRUM KIT] button to return to the
DRUM KIT screen.
Assigning functions to pads
You can assign a function to a pad that’s connected to
TRIGGER IN jack/AUX3, or to a pad that supports digital
connection and is assigned to AUX3.
1
Press the [SYSTEM] button.
The SYSTEM screen appears.
2
Use the cursor buttons to select “OPTION” and
press [ENTER] button.
The option settings screen appears.
3
Press the [F3] (CTRL) button.
FOOT SWITCH/PAD CONTROL screen appears.
4
Use the cursor buttons to select a parameter,
and use the dial to edit the value.
MEMO
5 If you don’t want sound to be produced when you strike
the pad, use PAD VOLUME to set the AUX3 volume to “0.”
Alternatively, set the AUX3 instrument as “OFF” (p. 31).
5 If you want to switch drum kits in the set list (p. 18) by
striking a pad, set the pad’s assigned function to “KIT#
DEC” or “KIT# INC,” and then turn on set lists in the DRUM
KIT screen. (Make the set list setting in advance.)
5
Press the [DRUM KIT] button to return to the
DRUM KIT screen.
Setting the AUTO OFF Function (AUTO OFF)
The power to this unit will be turned off automatically after
a predetermined amount of time has passed since it was
last used for playing music, or its buttons or controls were
operated.
If you do not want the power to be turned off automatically,
disengage the AUTO OFF function.
* To restore power, turn the power on again.
1
Press the [SYSTEM] button.
The SYSTEM screen appears.
2
Use the cursor buttons to select “AUTO OFF”
and press [ENTER] button.
The AUTO OFF SETTING screen appears.
3
Use the dial to specify the setting of the AUTO
OFF function.
Setting Explanation
OFF The power does not turn off automatically.
4 HOURS
When four hours have elapsed without any pad
being struck or any operation being performed,
the unit will turn off automatically.
MEMO
If the AUTO OFF function is set to “4 HOURS,” the message
“WARNING: AUTO OFF, The TD-27 will turn off in 30 min.”
appears 30 minutes before the power turns off.
4
Press the [DRUM KIT] button to return to the
DRUM KIT screen.