Roland TD-27KV2 V-Drums Electronic Drum Kit - Manual (Page 46)

46
Making Various Settings (SYSTEM)
Basic Operation in SYSTEM
Settings that are common to the entire unit, such as
functions related to backing up the TD-27’s settings and the
power supply settings, are called “system” settings.
1
Press the [SYSTEM] button.
The SYSTEM screen appears.
2
Use the cursor buttons to select the menu that
you want to edit, and press [ENTER] button.
Menu Explanation Page
BLUETOOTH Makes Bluetooth settings.
p. 20,
p. 46
SD CARD
Initializes an SD card, or backs-up
the TD-27’s settings to an SD card.
p. 47
TRIGGER
Adjusts the trigger settings so that
the TD-27 can accurately process
the signal from the triggers. You
can also adjust pad settings such as
sensitivity (SENSITIVITY).
p. 51
OUTPUT
Specify the output destination of
the sounds.
p. 55
USB AUDIO Make USB audio settings. p. 58
MIDI
Make MIDI settings for this unit
when another MIDI device is
connected.
p. 59
OPTION
Make settings for the MIX IN jacks,
and the display.
p. 60
AUTO OFF
Specifies whether the power
automatically turns off after a
specified length of time elapses.
p. 61
INFO
Shows information about the TD-27
itself, such as its program version.
p. 62
FACTORY
RESET
Return the TD-27 to its factory
settings.
p. 62
3
As appropriate for the menu item that you
selected, use the cursor buttons and the dial
to edit the settings.
4
Press the [DRUM KIT] button to return to the
DRUM KIT screen.
Bluetooth Settings (BLUETOOTH)
Here’s how to turn on/off this unit’s Bluetooth function,
or initiate pairing. You can also make settings for using
this unit connected with a smartphone app, or for pairing
with a smartphone in a location where there are multiple
TD-27 units.
1
Press the [SYSTEM] button.
The SYSTEM screen appears.
2
Move the cursor to the “BLUETOOTH” and
press the [ENTER] button.
The BLUETOOTH screen appears.
To turn the Bluetooth function on/off
3
Press the [F5] (ON/OFF) button.
This unit’s Bluetooth function turns on or off.
To make settings for the Bluetooth function
3
Press the [F2] (SETUP) button.
4
Use the cursor buttons to select the parameter
and the dial to change the value.
Parameter Value Explanation
Bluetooth MIDI
ON
If this is on, you can connect this unit
with a Bluetooth MIDI compatible
app on your smartphone etc.
OFF With the factory settings, this is off.
Device ID
OFF With the factory settings, this is off.
1–99
If you are pairing with your
smartphone in a location where
there are multiple TD-27 units, you
can assign an ID to each unit. When
you specify a Device ID, the specified
number is added to the end of the
device name that is shown on your
smartphone.
Example) “TD-27 AUDIO 1” “TD-27
MIDI 1” etc.
5
Press the [F5] (SAVE) button.
The edited setting is saved.
MEMO
To reset the Bluetooth settings, access the BLUETOOTH
SETUP screen and press the [F1](RESET) button.