Recording on a connected computer, Installing the usb driver, Recording on a connected computer” (p. 28) – Roland TD-27KV2 V-Drums Electronic Drum Kit User Manual
Page 28: Recording

28
Recording
10
Use the cursor buttons to select “OK,” and press
the [ENTER] button.
The song is saved on the SD card.
Recording on a Connected Computer
You can connect the TD-27 to your computer and record
28 channels of multi-track audio onto your DAW software
(commercially available), or record your performance as
MIDI data.
NOTE
5
For some types of computer, this might not work
correctly. Refer to the Roland website for details on the
operating systems that are supported.
5
A USB cable is not included. Use a USB 2.0 cable. You can
purchase one from the dealer where you purchased the
TD-27.
5
Use a USB port on your computer that supports USB2.0
Hi-Speed.
Installing the USB Driver
The USB driver is software that transfers data between the
TD-27 and your computer software.
In order to transmit and receive audio as USB AUDIO, you
must install the USB driver.
USB cable
(commercially available)
MEMO
For details on downloading and installing the USB driver,
refer to the Roland website.
http://www roland com/support/
Reference
For details on USB driver settings, refer to “Specifying the