ProSoft Technology 5105-103M-PDPS - Manual (Page 85)

5105-103M-PDPS ♦ ProLinx Gateway Diagnostics and Troubleshooting
IEC 60870-5-103 Master to PROFIBUS Slave Gateway User Manual
ProSoft Technology, Inc. Page 85 of 144
November 24, 2010
2.14 LED Indicators
Troubleshooting the operation of the IEC Master port can be performed using
several methods.
The first and quickest is to scan the LEDs on the module to determine the
existence and possibly the cause of a problem. This section provides insight into
the operation of the Serial Port status LEDs. Information on the module’s other
LEDs can be found in the ProLinx Reference Guide.
2.14.1 LEDs for Port 0 Serial Port
Some ProLinx modules have three extra serial ports. Each of these serial ports
has two LEDs indicating status.
LED Color Description
Port 0 - ACT Off No activity on the port.
Green Flash The port is either actively transmitting or receiving data
Port 0 - ERR Off Normal state. When off and Port Active led is indicating
activity, there are no communication errors
Red On or Flashing Activity on this led indicates some communication error
was detected, either during transmit or receive
2.14.2 LEDs for the PROFIBUS Slave Port
ACTIVE ERROR Description
Flashing On PROFIBUS communication problem (not
receiving output)
Off On Module configured and waiting for first output
data set.
Flashing together Configuration error during initialization.
Alternate flashing Watchdog timer expired.
On Off Normal operation.
On Rapid/irregular flash Configuration problem from master.
Off Flashing User timeout expired.
Off Off Module not receiving power or program
terminated.