ProSoft Technology 5105-103M-PDPS - Manual (Page 116)

Reference 5105-103M-PDPS ♦ ProLinx Gateway
User Manual IEC 60870-5-103 Master to PROFIBUS Slave Gateway
Page 116 of 144 ProSoft Technology, Inc.
November 24, 2010
Example Response Block From GW
Start Byte End Byte Description
0 0 201 (Get Time)
1 1 200 (Set Time)
2 3 Year
4 5 Month
6 7 Day
8 9 Hour
10 11 Minutes
12 13 Seconds & milliseconds
14 197 Reserved for future use
198 198 Events in buffer (0 to 99)
199 199 201 (Get Time)
Event Data Block Format
Block 100 to 101 identification codes are used to pass events to the PLC when
the Pass Through Event parameter is enabled (Yes). The PROFIBUS Slave
sends events to the 103M master, then the 103M Master sends them over
PROFIBUS from the Slave to the PROFIBUS Master.
Start Byte End Byte Data Field(s) Description
0 0 Block ID This field contains the value of 100 to 101 identifying
the block type to the module.
1 1 Last PLC Block ID Last block number for data received from PLC
2 3 Event Count Number of events present in the block. This field can
have a value from 0 to 9.
4 23 Event #1 Event data from IED’s.
24 43 Event #2 Event data from IED’s.
44 63 Event #3 Event data from IED’s.
64 83 Event #4 Event data from IED’s.
84 103 Event #5 Event data from IED’s.
104 123 Event #6 Event data from IED’s.
124 143 Event #7 Event data from IED’s.
144 163 Event #8 Event data from IED’s.
164 183 Event #9 Event data from IED’s.
184 197 Reserved Reserved for future use.
198 198 Buffer Count Number of events present in the event buffer of the
103 master driver (0 to 99)
199 199 Block ID Copy of byte 0 in the block.